How to attach a new hard disk to ubuntu linux

root@server-tribeca:/etc# fdisk -l

Disk /dev/sda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x9dc96e9e

Device Boot Start End Blocks Id System
/dev/sda1 * 1 4689 37664361 83 Linux
/dev/sda2 4690 4865 1413720 5 Extended
/dev/sda5 4690 4865 1413688+ 82 Linux swap / Solaris

Disk /dev/sdb: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00a080f4

Device Boot Start End Blocks Id System
/dev/sdb1 * 1 13 104391 83 Linux
/dev/sdb2 14 14471 116133885 83 Linux
/dev/sdb3 14472 14593 979965 82 Linux swap / Solaris

root@server-tribeca:/etc# fdisk /dev/sdb

The number of cylinders for this disk is set to 14593.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): d
Partition number (1-4): 1

Command (m for help): d
Partition number (1-4): 2

Command (m for help): d
Selected partition 3

Command (m for help): d
No partition is defined yet!

Command (m for help): n
Command action
e extended
p primary partition (1-4)
p
Partition number (1-4): 1
First cylinder (1-14593, default 1): 1
Last cylinder or +size or +sizeM or +sizeK (1-14593, default 14593):
Using default value 14593

Command (m for help): w
The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.

root@server-tribeca:/etc# mkfs.ext3 /dev/sdb1
mke2fs 1.40.8 (13-Mar-2008)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
7331840 inodes, 29304560 blocks
1465228 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=0
895 block groups
32768 blocks per group, 32768 fragments per group
8192 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872

Writing inode tables: done
Creating journal (32768 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 22 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.

root@server-tribeca:/etc# ls /dev/disk/by-uuid -alh
lrwxrwxrwx 1 root root 10 2008-05-07 17:58 753a86d9-6228-4725-a9ae-6f457c2b1824 -> ../../sdb1
lrwxrwxrwx 1 root root 10 2008-05-07 17:58 dbd44197-c1c5-427d-9a34-40f652b92f42 -> ../../sda1
lrwxrwxrwx 1 root root 10 2008-05-07 17:58 e15f5c2c-fc1f-414d-8c67-99c567f44d6a -> ../../sda5

root@server-tribeca:/etc# mkdir /disk1

root@server-tribeca:/etc# vi /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sda1
UUID=dbd44197-c1c5-427d-9a34-40f652b92f42 / ext3 relatime,errors=remount-ro 0 1
# /dev/sda5
UUID=e15f5c2c-fc1f-414d-8c67-99c567f44d6a none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
UUID=753a86d9-6228-4725-a9ae-6f457c2b1824 /disk1 ext3 defaults,errors=remount-ro 0 1

Advertisements

One Response to “How to attach a new hard disk to ubuntu linux”

  1. Alexwebmaster Says:

    Hello webmaster
    I would like to share with you a link to your site
    write me here preonrelt@mail.ru

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: